IAP-420/IAP-420+
Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)
Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X)
IAP-420 |
IAP-420+ |
|
Physical Ports |
||
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX |
2 |
|
P.O.E. PD port |
|
Present at ETH2 |
WLAN interface |
|
|
Operating Mode |
AP/Bridge/AP-Client |
|
Antenna Connector |
1 x External reverse SMA-type antenna connector |
|
Radio Frequency Type |
DSSS, OFDM |
|
Modulation |
IEEE802.11b: CCK, DQPSK, DBPSK |
|
Frequency Band |
America/FCC: 2.412~2.462 GHz (11 channels) |
|
Transmission Rate |
802.11b: 1/2/5.5/11 Mbps |
|
Transmit Power |
802.11b: 13.5dBm ±1.5dBm |
|
Receiver Sensitivity |
802.11b: -90dBm ±2dBm@1Mbps |
|
Encryption Security |
WEP: (64-bit, 128-bit key supported) |
|
Wireless Security |
SSID broadcast disable and enable |
|
Protocol Support |
|
|
Protocol |
ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP |
|
LED Indicators |
|
|
Power Indicator |
LED x 3, PWR 1, 2, (PoE): |
|
100/1000TX RJ45 Port Indicator |
LED x 2 , Green for port Link/Act at 100Mbps. |
|
WLAN LEDs |
WLAN Link /ACT: Green: Link, |
|
Power |
|
|
Redundant Input Power |
Dual DC inputs. 12~48VDC on 4-pin terminal block |
|
Power Consumption (Typ.) |
4watts |
|
Overload Current Protection |
Present |
|
Reverse Polarity Protection |
Present |
|
Physical Characteristic |
|
|
Enclosure |
IP-30 |
|
Dimension (W x D x H) |
41(W) x 81(D) x 95(H) mm (1.6 x 3.1 x 3.7 inch.) |
|
Weight (g) |
292 |
297 |
Environmental |
|
|
Storage Temperature |
-40 to 85°C (-40 to 185°F) |
|
Operating Temperature |
-10 to 60oC (14 to 140oF) |
|
Operating Humidity |
5% to 95% Non-condensing |
|
Regulatory approvals |
|
|
EMI |
FCC Part 15, CISPR (EN55022) class A |
|
EMS |
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11 |
|
Shock |
IEC60068-2-27 |
|
Free Fall |
IEC60068-2-31 |
|
Vibration |
IEC60068-2-6 |
|
Safety |
EN60950-1 |
|
Warranty |
3 years |